Bio Mass Based Carbon Di-Oxide Production Plant

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Bio Mass Based Carbon Di-Oxide Production Plant is wide in demand in different sectors for the production plant. We assemble the plant integrating well developed technology, so that its working life, production and strength can be maximized. These production plants are of vital importance to power generation plants.

Features :

Low cost of operation
Less maintenance required
Compact to design and layout
Simplified operation
No contamination of lubricating oil

Specification :

Ashirwad Carbonics (India) Private Limited, Ghaziabad (India)
Utility Requirement for Different Capacity CO₂ Production Plant
Plant Capacity	Recommended Area						Power	Make Up Water		Liquid CO₂ Storage Capacity	Fuel Oil
Plant Capacity	Length		Width		Height		Power	Make Up Water		Liquid CO₂ Storage Capacity	Fuel Oil
In Kg/Hr.	Ft.	Mtr.	Ft.	Mtr.	In Ft.	Mtr.	KW	GPM	L/MIN	In Metric Ton	GPH	L/HR
100	50	15.2	28	8.5	39	100	50	15.2	28	8.5	39	100
250	57	17.4	39	11.9	40	250	57	17.4	39	11.9	40	250
500	66	19.8	46	14	41	500	66	19.8	46	14	41	500
650	65	19.8	55	13.8	41	650	65	19.8	55	13.8	41	650
1000	72	21.9	55	16.8	48	1000	72	21.9	55	16.8	48	1000
Larger Capacities are available on request as per customer requirement.

Production Process :

Fuel is burned under specific conditions controlled by PLC control panel
Post the scrubbing of water /soda in DCC tower/SO₂ removal tower, the flue gas is absorbed in the monoethanolamine based solution present in absorber tower and then into the stripper tower which is subsequently heated by the combustion process to release the raw CO₂ gas
The carbon dioxide is fed into the PTK, a purification train that comprises two KmNO4 towers
After passing through activated carbon filter, it is fed into two stage vertical or horizontal compressor and finally into the high pressure pre-cooler and then into the dryer
From there, it moves towards the liquefaction system in which screw compressor and R 404A is used as a refrigerant
Finally pure and liquefied carbon dioxide produced is fed into a bulk storage tank

Components used in the plant :